--- /dev/null
+ServerTokens OS
+
+ServerRoot "/etc/httpd"
+
+PidFile run/httpd.pid
+Timeout 300
+KeepAlive Off
+MaxKeepAliveRequests 100
+KeepAliveTimeout 15
+<IfModule prefork.c>
+StartServers 8
+MinSpareServers 5
+MaxSpareServers 20
+MaxClients 150
+MaxRequestsPerChild 1000
+</IfModule>
+
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule worker.c>
+StartServers 2
+MaxClients 150
+MinSpareThreads 25
+MaxSpareThreads 75
+ThreadsPerChild 25
+MaxRequestsPerChild 0
+</IfModule>
+
+# MaxRequestsPerChild: maximum number of connections per server process
+<IfModule perchild.c>
+NumServers 5
+StartThreads 5
+MinSpareThreads 5
+MaxSpareThreads 10
+MaxThreadsPerChild 20
+MaxRequestsPerChild 0
+</IfModule>
+
+Listen 80
+
+Include conf.d/*.conf
+
+LoadModule access_module modules/mod_access.so
+LoadModule auth_module modules/mod_auth.so
+LoadModule auth_anon_module modules/mod_auth_anon.so
+LoadModule auth_dbm_module modules/mod_auth_dbm.so
+LoadModule auth_digest_module modules/mod_auth_digest.so
+LoadModule include_module modules/mod_include.so
+LoadModule log_config_module modules/mod_log_config.so
+LoadModule env_module modules/mod_env.so
+LoadModule mime_magic_module modules/mod_mime_magic.so
+LoadModule cern_meta_module modules/mod_cern_meta.so
+LoadModule expires_module modules/mod_expires.so
+LoadModule headers_module modules/mod_headers.so
+LoadModule usertrack_module modules/mod_usertrack.so
+LoadModule unique_id_module modules/mod_unique_id.so
+LoadModule setenvif_module modules/mod_setenvif.so
+LoadModule mime_module modules/mod_mime.so
+LoadModule dav_module modules/mod_dav.so
+LoadModule status_module modules/mod_status.so
+LoadModule autoindex_module modules/mod_autoindex.so
+LoadModule asis_module modules/mod_asis.so
+LoadModule info_module modules/mod_info.so
+LoadModule cgi_module modules/mod_cgi.so
+LoadModule dav_fs_module modules/mod_dav_fs.so
+LoadModule vhost_alias_module modules/mod_vhost_alias.so
+LoadModule negotiation_module modules/mod_negotiation.so
+LoadModule dir_module modules/mod_dir.so
+LoadModule imap_module modules/mod_imap.so
+LoadModule actions_module modules/mod_actions.so
+LoadModule speling_module modules/mod_speling.so
+LoadModule userdir_module modules/mod_userdir.so
+LoadModule alias_module modules/mod_alias.so
+LoadModule rewrite_module modules/mod_rewrite.so
+LoadModule proxy_module modules/mod_proxy.so
+LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
+LoadModule proxy_http_module modules/mod_proxy_http.so
+LoadModule proxy_connect_module modules/mod_proxy_connect.so
+
+
+User apache
+Group apache
+
+ServerAdmin root@localhost
+
+#ServerName new.host.name:80
+
+UseCanonicalName Off
+
+DocumentRoot "/var/www/gforge/www"
+
+<Directory />
+ Options FollowSymLinks
+ AllowOverride All
+</Directory>
+
+<Directory "/var/www/gforge/html">
+ Options Indexes FollowSymLinks
+ AllowOverride All
+ Order allow,deny
+ Allow from all
+ErrorDocument 404 /404.php
+</Directory>
+
+<LocationMatch "^/$>
+ Options -Indexes
+ ErrorDocument 403 /error/noindex.html
+</LocationMatch>
+
+<IfModule mod_userdir.c>
+ UserDir disable
+
+</IfModule>
+
+DirectoryIndex index.html index.html.var
+AccessFileName .htaccess
+<Files ~ "^\.ht">
+ Order allow,deny
+ Deny from all
+</Files>
+TypesConfig /etc/mime.types
+DefaultType text/plain
+<IfModule mod_mime_magic.c>
+ MIMEMagicFile conf/magic
+</IfModule>
+
+HostnameLookups Off
+
+#
+ErrorLog logs/error_log
+
+#
+LogLevel warn
+
+#
+LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
+LogFormat "%h %l %u %t \"%r\" %>s %b" common
+LogFormat "%{Referer}i -> %U" referer
+LogFormat "%{User-agent}i" agent
+
+CustomLog logs/access_log combined
+
+#
+ServerSignature On
+
+#
+Alias /icons/ "/var/www/icons/"
+
+<Directory "/var/www/icons">
+ Options Indexes MultiViews
+ AllowOverride None
+ Order allow,deny
+ Allow from all
+</Directory>
+
+Alias /manual "/var/www/manual"
+
+<Directory "/var/www/manual">
+ Options Indexes FollowSymLinks MultiViews
+ AllowOverride None
+ Order allow,deny
+ Allow from all
+</Directory>
+Alias /maven "/var/www/maven"
+
+<IfModule mod_dav_fs.c>
+ # Location of the WebDAV lock database.
+ DAVLockDB /var/lib/dav/lockdb
+</IfModule>
+
+ScriptAlias /cgi-bin/ "/var/www/gforge/cgi-bin/"
+
+<IfModule mod_cgid.c>
+#
+# Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
+# for setting UNIX socket for communicating with cgid.
+#
+#Scriptsock logs/cgisock
+</IfModule>
+
+#
+# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
+# CGI directory exists, if you have that configured.
+#
+<Directory "/var/www/gforge/cgi-bin">
+ AllowOverride All
+ Options None
+ Order allow,deny
+ Allow from all
+</Directory>
+
+IndexOptions FancyIndexing VersionSort NameWidth=*
+
+AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
+
+AddIconByType (TXT,/icons/text.gif) text/*
+AddIconByType (IMG,/icons/image2.gif) image/*
+AddIconByType (SND,/icons/sound2.gif) audio/*
+AddIconByType (VID,/icons/movie.gif) video/*
+
+AddIcon /icons/binary.gif .bin .exe
+AddIcon /icons/binhex.gif .hqx
+AddIcon /icons/tar.gif .tar
+AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
+AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
+AddIcon /icons/a.gif .ps .ai .eps
+AddIcon /icons/layout.gif .html .shtml .htm .pdf
+AddIcon /icons/text.gif .txt
+AddIcon /icons/c.gif .c
+AddIcon /icons/p.gif .pl .py
+AddIcon /icons/f.gif .for
+AddIcon /icons/dvi.gif .dvi
+AddIcon /icons/uuencoded.gif .uu
+AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
+AddIcon /icons/tex.gif .tex
+AddIcon /icons/bomb.gif core
+
+AddIcon /icons/back.gif ..
+AddIcon /icons/hand.right.gif README
+AddIcon /icons/folder.gif ^^DIRECTORY^^
+AddIcon /icons/blank.gif ^^BLANKICON^^
+
+#
+# DefaultIcon is which icon to show for files which do not have an icon
+# explicitly set.
+#
+DefaultIcon /icons/unknown.gif
+
+ReadmeName README.html
+HeaderName HEADER.html
+
+IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
+
+#
+AddEncoding x-compress Z
+AddEncoding x-gzip gz tgz
+
+#
+AddLanguage da .dk
+AddLanguage nl .nl
+AddLanguage en .en
+AddLanguage et .et
+AddLanguage fr .fr
+AddLanguage de .de
+AddLanguage he .he
+AddLanguage el .el
+AddLanguage it .it
+AddLanguage ja .ja
+AddLanguage pl .po
+AddLanguage kr .kr
+AddLanguage pt .pt
+AddLanguage nn .nn
+AddLanguage no .no
+AddLanguage pt-br .pt-br
+AddLanguage ltz .ltz
+AddLanguage ca .ca
+AddLanguage es .es
+AddLanguage sv .se
+AddLanguage cz .cz
+AddLanguage ru .ru
+AddLanguage tw .tw
+AddLanguage zh-tw .tw
+AddLanguage hr .hr
+#
+LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ltz ca es sv tw
+ForceLanguagePriority Prefer Fallback
+
+#
+AddDefaultCharset ISO-8859-1
+
+#
+AddCharset ISO-8859-1 .iso8859-1 .latin1
+AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
+AddCharset ISO-8859-3 .iso8859-3 .latin3
+AddCharset ISO-8859-4 .iso8859-4 .latin4
+AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru
+AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb
+AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk
+AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb
+AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk
+AddCharset ISO-2022-JP .iso2022-jp .jis
+AddCharset ISO-2022-KR .iso2022-kr .kis
+AddCharset ISO-2022-CN .iso2022-cn .cis
+AddCharset Big5 .Big5 .big5
+# For russian, more than one charset is used (depends on client, mostly):
+AddCharset WINDOWS-1251 .cp-1251 .win-1251
+AddCharset CP866 .cp866
+AddCharset KOI8-r .koi8-r .koi8-ru
+AddCharset KOI8-ru .koi8-uk .ua
+AddCharset ISO-10646-UCS-2 .ucs2
+AddCharset ISO-10646-UCS-4 .ucs4
+AddCharset UTF-8 .utf8
+
+# The set below does not map to a specific (iso) standard
+# but works on a fairly wide range of browsers. Note that
+# capitalization actually matters (it should not, but it
+# does for some browsers).
+#
+# See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets
+# for a list of sorts. But browsers support few.
+#
+AddCharset GB2312 .gb2312 .gb
+AddCharset utf-7 .utf7
+AddCharset utf-8 .utf8
+AddCharset big5 .big5 .b5
+AddCharset EUC-TW .euc-tw
+AddCharset EUC-JP .euc-jp
+AddCharset EUC-KR .euc-kr
+AddCharset shift_jis .sjis
+
+#
+# AddType allows you to add to or override the MIME configuration
+# file mime.types for specific file types.
+#
+AddType application/x-tar .tgz
+
+AddHandler imap-file map
+
+AddHandler type-map var
+
+AddOutputFilter INCLUDES .shtml
+
+Alias /error/ "/var/www/error/"
+
+<IfModule mod_negotiation.c>
+<IfModule mod_include.c>
+ <Directory "/var/www/error">
+ AllowOverride None
+ Options IncludesNoExec
+ AddOutputFilter Includes html
+ AddHandler type-map var
+ Order allow,deny
+ Allow from all
+ LanguagePriority en es de fr
+ ForceLanguagePriority Prefer Fallback
+ </Directory>
+
+ ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
+ ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
+ ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
+ ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
+ ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
+ ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
+ ErrorDocument 410 /error/HTTP_GONE.html.var
+ ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
+ ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
+ ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
+ ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
+ ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
+ ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
+ ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
+ ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
+ ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
+ ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
+
+</IfModule>
+</IfModule>
+
+#
+BrowserMatch "Mozilla/2" nokeepalive
+BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
+BrowserMatch "RealPlayer 4\.0" force-response-1.0
+BrowserMatch "Java/1\.0" force-response-1.0
+BrowserMatch "JDK/1\.0" force-response-1.0
+
+BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
+BrowserMatch "^WebDrive" redirect-carefully
+
--- /dev/null
+<?php
+// GForge Universal Site Modifications
+// by David HM Spector <spector@zeitgeist.com>
+//
+// Really Important Safety Tip: --> DO NOT LEAVE ANY WHITE
+// SPACE AFTER THE CLOSING PHP TAG AT THE END OF THIS FILE!
+//
+// Doing so will really confuse the software and cause
+// 1) cookies to fail and 2) HTML page headers to fail
+// which will give you some preally hard-to-debug problems.
+// Why? PHP is a *pre-processor* -- anything that's not PHP gets
+// emitted as part of the HTML stream and processed by the browser,
+// so white space is meaningful!
+//
+//
+// GForge hostnames
+//
+// Hostnames should be fully qualified domain names (FQDNs); using short names
+// would be prettier but would stop you from distributing your SourceForge
+// implementation across multiple domains.
+//
+// Of course, if you have a lot of machines serving a particular purpose
+// such as FTP or for shell accounts, the "hostname" here might be in
+// reality an addr_list of machines that is serviced by a round-robin
+// mechanism or something fancy like a local-director.
+//
+// The default GForge domain
+// this is used where ever the "naked" form of the GForge domain
+// might be used. E.g., "mailto:admin@gforge.net"
+$sys_default_domain = 'localhost';
+$sys_fallback_domain = 'gforge2.company.com';
+$sys_internal_network = '192.168.1.';
+
+// Machine that hosts CVS
+$sys_cvs_host = 'cvs.company.com';
+
+// Machine used for downloading sources/packages
+$sys_download_host = "download.company.com";
+
+// Machine used for uploading sources/packages
+$sys_upload_host = "upload.company.com";
+
+// Machine(s) that host users' shell accounts
+// N.B. to the SourceForge Crew: What's the difference between the user
+// host and the shell host? They are clearly two different hostnames
+// in the source code, but they seem to serve the same purpose..?
+$sys_shell_host = "shell.company.com";
+$sys_users_host = "users.company.com";
+$homedir_prefix='/home';
+$groupdir_prefix='/home/groups';
+
+// Machine that hosts docs (such as the FAQs and the various software
+// licenses (*BSD, [L]GPL, etc.). You REALLY want this to be the same
+// machine that the SourceForge code is running on because all of the
+// PHP makes reference to these documents in terms of relative paths that
+// are part of the GForge code tree.
+$sys_docs_host = "sfdocs.company.com";
+
+// Machine that hosts the GForge mailing lists (This could also be
+// the mail host if you have enough horsepower & bandwidth)
+$sys_lists_host = "lists.company.com";
+
+// Domain Name Servers
+// N.B.: Use terminated FQDNs here (with the final ".") so the resolver
+// doesn't attempt to recurse in the case of a slightly broken DNS
+// configuration
+$sys_dns1_host = "ns1.company.com";
+$sys_dns2_host = "ns2.company.com";
+
+//Databases, html/php/other paths
+//server to use for updates and reads
+$sys_dbhost="localhost";
+//whether or not to use replication
+$sys_db_use_replication=false;
+$sys_dbreadhost='localhost';
+$sys_dbreaddb='stats';
+$sys_dbname="gforge";
+$sys_dbuser="gforge";
+$sys_dbpasswd="gforge";
+$sys_server="pgsql";
+
+//
+// LDAP configurataion
+//
+// disable ldap use altogether
+$sys_use_ldap=0;
+$sys_ldap_host="ldap.company.com";
+$sys_ldap_port=389;
+// this is dn under which all information stored
+$sys_ldap_base_dn="dc=company,dc=com";
+// and this, how we do access it (add permission required)
+$sys_ldap_bind_dn="cn=SF_robot,dc=company,dc=com";
+$sys_ldap_passwd="";
+// admin dn - login dn which has permissions to delete entries
+// NOT used by web code, only by support utilities
+// note that password NOT stored here
+$sys_ldap_admin_dn="cn=Manager,dc=company,dc=com";
+
+
+//
+// Jabber Configuration
+//
+$sys_use_jabber=0;
+ //messages from the system will be sent to this address
+$sys_jabber_server='jabber.company.com';
+$sys_jabber_port='5222';
+ // messages sent to jabber accounts will come from this user
+ // It is similar to the "From: noreply@gforge.org" used in emails
+$sys_jabber_user='noreply';
+$sys_jabber_pass='temp123';
+
+//
+// File Upload Configuration
+//
+// Create a directory, which is writable by your webserver, but not
+// within its document root (does not fall under www/ in the tarball)
+// Your php.ini file may have to be modified to allow writing outside
+// the webserver's directory
+//
+$sys_upload_dir='/var/www/gforge-files/';
+
+// Where the GForge files are placed
+// *** IMPORTANT: sys_urlroot *MUST* be an ABSOLUTE FILEYSTEM PATH NAME
+// that points to the www directory of the GForge
+// installation. If you use ANY form of relative path
+// you will break the html_image function in include/html.php
+//
+$sys_urlroot="/var/www/gforge/www/";
+
+// Name of the system as a whole (needed by various utils and titles)
+$sys_name="devportal";
+
+// session cookie settings
+//
+// IMPORTANT - YOU MUST CHANGE "foobar" to a long, random number
+//
+$sys_session_key = "foobar";
+$sys_session_expire = 60 * 60 * 24 * 7;
+
+// Require that user give unique (not yet existent in db) email upon
+// registration
+$sys_require_unique_email=0;
+
+// Themeing related vars... Some of this needs to change in the session stuff
+// The theme base directory, everything else is handled by theme_sysinit()
+$sys_themeroot=$sys_urlroot."themes/";
+// If you want an other default theme or language
+$sys_theme='dialogos3';
+#$sys_lang='English';
+$sys_lang='Italian';
+
+// Akamization of images
+// example: http://images.company.com
+$sys_images_url = "";
+$sys_images_secure_url = "";
+
+// Groups
+// The GForge permission model is based on groups
+// certain parts of the site, like news, stats, etc
+// are based on special group_id numbers
+// group_id #1 is the super-user group of sitewide admins
+$sys_news_group=3;
+$sys_stats_group=2;
+$sys_peer_rating_group=4;
+$default_trove_cat=18;
+
+// JPGRAPH Package
+$sys_path_to_jpgraph='/path/to/jpgraph/src/';
+$sys_show_source=0;
+
+// End of customizations -- place nothing after the closing PHP tag!
+?>
--- /dev/null
+[PHP]
+
+;;;;;;;;;;;
+; WARNING ;
+;;;;;;;;;;;
+; This is the default settings file for new PHP installations.
+; By default, PHP installs itself with a configuration suitable for
+; development purposes, and *NOT* for production purposes.
+; For several security-oriented considerations that should be taken
+; before going online with your site, please consult php.ini-recommended
+; and http://php.net/manual/en/security.php.
+
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; This file controls many aspects of PHP's behavior. In order for PHP to
+; read it, it must be named 'php.ini'. PHP looks for it in the current
+; working directory, in the path designated by the environment variable
+; PHPRC, and in the path that was defined in compile time (in that order).
+; Under Windows, the compile-time path is the Windows directory. The
+; path in which the php.ini file is looked for can be overridden using
+; the -c argument in command line mode.
+;
+; The syntax of the file is extremely simple. Whitespace and Lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+;
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+;
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
+;
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+;
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+;
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+;
+; foo = ; sets foo to an empty string
+; foo = none ; sets foo to an empty string
+; foo = "none" ; sets foo to the string 'none'
+;
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+;
+; All the values in the php.ini-dist file correspond to the builtin
+; defaults (that is, if no php.ini is used, or if you delete these lines,
+; the builtin defaults will be identical).
+
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+engine = On
+
+; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
+short_open_tag = Off
+
+; Allow ASP-style <% %> tags.
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+precision = 14
+
+; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
+y2k_compliance = Off
+
+; Output buffering allows you to send header lines (including cookies) even
+; after you send body content, at the price of slowing PHP's output layer a
+; bit. You can enable output buffering during runtime by calling the output
+; buffering functions. You can also enable output buffering for all files by
+; setting this directive to On. If you wish to limit the size of the buffer
+; to a certain size - you can use a maximum number of bytes instead of 'On', as
+; a value for this directive (e.g., output_buffering=4096).
+output_buffering = Off
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "ob_gzhandler", output will be
+; transparently compressed for browsers that support gzip or deflate encoding.
+; Setting an output handler automatically turns on output buffering.
+output_handler =
+
+; The unserialize callback function will called (with the undefind class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instanciated.
+; A warning appears if the specified function is not defined, or if the
+; function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func=
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+;
+; Note: output_handler must be empty if this is set 'On' !!!!
+;
+zlib.output_compression = Off
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+implicit_flush = Off
+
+; Whether to enable the ability to force arguments to be passed by reference
+; at function call time. This method is deprecated and is likely to be
+; unsupported in future versions of PHP/Zend. The encouraged method of
+; specifying which arguments should be passed by reference is in the function
+; declaration. You're encouraged to try and turn this option Off and make
+; sure your scripts work properly with it in order to ensure they will work
+; with future versions of the language (you will receive a warning each time
+; you use this feature, and the argument will be passed by value instead of by
+; reference).
+allow_call_time_pass_reference = On
+
+; Safe Mode
+;
+safe_mode = Off
+
+; By default, Safe Mode does a UID compare check when
+; opening files. If you want to relax this to a GID compare,
+; then turn on safe_mode_gid.
+safe_mode_gid = Off
+
+; When safe_mode is on, UID/GID checks are bypassed when
+; including files from this directory and its subdirectories.
+; (directory must also be in include_path or full path must
+; be used when including)
+safe_mode_include_dir =
+
+; When safe_mode is on, only executables located in the safe_mode_exec_dir
+; will be allowed to be executed via the exec family of functions.
+safe_mode_exec_dir =
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file.
+;
+;open_basedir =
+
+; Setting certain environment variables may be a potential security breach.
+; This directive contains a comma-delimited list of prefixes. In Safe Mode,
+; the user may only alter environment variables whose names begin with the
+; prefixes supplied here. By default, users will only be able to set
+; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
+;
+; Note: If this directive is empty, PHP will let the user modify ANY
+; environment variable!
+safe_mode_allowed_env_vars = PHP_
+
+; This directive contains a comma-delimited list of environment variables that
+; the end user won't be able to change using putenv(). These variables will be
+; protected even if safe_mode_allowed_env_vars is set to allow to change them.
+safe_mode_protected_env_vars = LD_LIBRARY_PATH
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+disable_functions =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <font color="??????"> would work.
+highlight.string = #CC0000
+highlight.comment = #FF9900
+highlight.keyword = #006600
+highlight.bg = #FFFFFF
+highlight.default = #0000CC
+highlight.html = #000000
+
+
+;
+; Misc
+;
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+expose_php = On
+
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+max_execution_time = 30 ; Maximum execution time of each script, in seconds
+memory_limit = 8M ; Maximum amount of memory a script may consume (8MB)
+
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; error_reporting is a bit-field. Or each number up to get desired error
+; reporting level
+; E_ALL - All errors and warnings
+; E_ERROR - fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it's automatically initialized to an
+; empty string)
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+;
+; Examples:
+;
+; - Show all errors, except for notices
+;
+;error_reporting = E_ALL & ~E_NOTICE
+;
+; - Show only errors
+;
+;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
+;
+; - Show all errors except for notices
+;
+error_reporting = E_ERROR
+
+; Print out errors (as a part of the output). For production web sites,
+; you're strongly encouraged to turn this feature off, and use error logging
+; instead (see below). Keeping display_errors enabled on a production web site
+; may reveal security information to end users, such as file paths on your Web
+; server, your database schema or other information.
+display_errors = Off
+
+; Even when display_errors is on, errors that occur during PHP's startup
+; sequence are not displayed. It's strongly recommended to keep
+; display_startup_errors off, except for when debugging.
+display_startup_errors = Off
+
+; Log errors into a log file (server-specific log, stderr, or error_log (below))
+; As stated above, you're strongly advised to use error logging in place of
+; error displaying on production web sites.
+log_errors = Off
+
+; Store the last error/warning message in $php_errormsg (boolean).
+track_errors = Off
+
+; Disable the inclusion of HTML tags in error messages.
+;html_errors = Off
+
+; String to output before an error message.
+;error_prepend_string = "<font color=ff0000>"
+
+; String to output after an error message.
+;error_append_string = "</font>"
+
+; Log errors to specified file.
+;error_log = filename
+
+; Log errors to syslog (Event Log on NT, not valid in Windows 95).
+;error_log = syslog
+
+; Warn if the + operator is used with strings.
+warn_plus_overloading = Off
+
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+;
+; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
+
+; The separator used in PHP generated URLs to separate arguments.
+; Default is "&".
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; Default is "&".
+; NOTE: Every character in this directive is considered as separator!
+;arg_separator.input = ";&"
+
+; This directive describes the order in which PHP registers GET, POST, Cookie,
+; Environment and Built-in variables (G, P, C, E & S respectively, often
+; referred to as EGPCS or GPC). Registration is done from left to right, newer
+; values override older values.
+variables_order = "EGPCS"
+
+; Whether or not to register the EGPCS variables as global variables. You may
+; want to turn this off if you don't want to clutter your scripts' global scope
+; with user data. This makes most sense when coupled with track_vars - in which
+; case you can access all of the GPC variables through the $HTTP_*_VARS[],
+; variables.
+;
+; You should do your best to write your scripts so that they do not require
+; register_globals to be on; Using form variables as globals can easily lead
+; to possible security problems, if the code is not very well thought of.
+register_globals = On
+
+; This directive tells PHP whether to declare the argv&argc variables (that
+; would contain the GET information). If you don't use these variables, you
+; should turn it off for increased performance.
+register_argc_argv = On
+
+; Maximum size of POST data that PHP will accept.
+post_max_size = 8M
+
+; This directive is deprecated. Use variables_order instead.
+gpc_order = "GPC"
+
+; Magic quotes
+;
+
+; Magic quotes for incoming GET/POST/Cookie data.
+magic_quotes_gpc = On
+
+; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
+magic_quotes_runtime = Off
+
+; Use Sybase-style magic quotes (escape ' with '' instead of \').
+magic_quotes_sybase = Off
+
+; Automatically add files before or after any PHP document.
+auto_prepend_file =
+auto_append_file =
+
+; As of 4.0b4, PHP always outputs a character encoding by default in
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+default_mimetype = "text/html"
+;default_charset = "iso-8859-1"
+
+; Always populate the $HTTP_RAW_POST_DATA variable.
+;always_populate_raw_post_data = On
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+;include_path = ".:/php/includes"
+include_path=".:/var/www/gforge/:/var/www/gforge/common/include:/var/www/gforge/www/include:/var/www/gforge/etc/"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+doc_root =
+
+; The directory under which PHP opens the script using /~usernamem used only
+; if nonempty.
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+extension_dir = /usr/lib/php4
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+enable_dl = On
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; cgi.force_redirect = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; cgi.redirect_status_env = ;
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+upload_max_filesize = 2M
+
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+allow_url_fopen = On
+
+; Define the anonymous ftp password (your email address)
+;from="john@doe.com"
+
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+;
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, on Windows:
+;
+; extension=msql.dll
+;
+; ... or under UNIX:
+;
+; extension=msql.so
+;
+; Note that it should be the name of the module only; no directory information
+; needs to go here. Specify the location of the extension with the
+; extension_dir directive above.
+
+
+;Windows Extensions
+;Note that MySQL and ODBC support is now built in, so no dll is needed for it.
+;
+;extension=php_bz2.dll
+;extension=php_ctype.dll
+;extension=php_cpdf.dll
+;extension=php_curl.dll
+;extension=php_cybercash.dll
+;extension=php_db.dll
+;extension=php_dba.dll
+;extension=php_dbase.dll
+;extension=php_dbx.dll
+;extension=php_domxml.dll
+;extension=php_dotnet.dll
+;extension=php_exif.dll
+;extension=php_fbsql.dll
+;extension=php_fdf.dll
+;extension=php_filepro.dll
+;extension=php_gd.dll
+;extension=php_gettext.dll
+;extension=php_hyperwave.dll
+;extension=php_iconv.dll
+;extension=php_ifx.dll
+;extension=php_iisfunc.dll
+;extension=php_imap.dll
+;extension=php_ingres.dll
+;extension=php_interbase.dll
+;extension=php_java.dll
+;extension=php_ldap.dll
+;extension=php_mbstring.dll
+;extension=php_mcrypt.dll
+;extension=php_mhash.dll
+;extension=php_ming.dll
+;extension=php_mssql.dll
+;extension=php_mysql.dll
+;extension=php_oci8.dll
+;extension=php_odbc.dll
+;extension=php_openssl.dll
+;extension=php_oracle.dll
+;extension=php_pdf.dll
+;extension=php_pgsql.dll
+;extension=php_printer.dll
+;extension=php_sablot.dll
+;extension=php_shmop.dll
+;extension=php_snmp.dll
+;extension=php_sockets.dll
+;extension=php_sybase_ct.dll
+;extension=php_tokenizer.dll
+;extension=php_w32api.dll
+;extension=php_xslt.dll
+;extension=php_yaz.dll
+;extension=php_zlib.dll
+
+;Linux world
+;
+extension=imap.so
+extension=ldap.so
+;extension=mysql.so
+;extension=odbc.so
+extension=pgsql.so
+;extension=snmp.so
+;extension=dbg.so
+
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[debugger]
+debugger.enabled = False ; enables dbg extension
+ ; May cause problems when
+ ; being acessed through a
+ ; firewall, if the debugging
+ ; port isn't allowed through
+ ; hense it is off by default
+debugger.profiler_enabled = True ; enables dbg profiler
+debugger.JIT_enabled = True ; enables JIT sessions
+ ; (auto-activated)
+debugger.JIT_port = 7869 ; default port to be used this
+ ; should be the same as the
+ ; port number opened by the
+ ; dbg listener
+debugger.JIT_host = clienthost ; either real client IP or
+ ; a keyword "clienthost"
+debugger.JIT_level = 3 ; JIT activation level
+ ; 0 - disables JIT,
+ ; 1 - E_CORE,
+ ; 2 - E_CORE | E_ERROR |
+ ; E_PARSE |
+ ; E_COMPILE_ERROR |
+ ; E_USER_ERROR
+ ; 3 - E_ALL & ~(E_NOTICE |
+ ; E_USER_NOTICE)
+ ; 4 - E_ALL
+
+
+[Syslog]
+; Whether or not to define the various syslog variables (e.g. $LOG_PID,
+; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
+; runtime, you can define these variables by calling define_syslog_variables().
+define_syslog_variables = Off
+
+[mail function]
+; For Win32 only.
+SMTP = localhost
+
+; For Win32 only.
+sendmail_from = me@localhost.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+sendmail_path = /usr/sbin/sendmail -t -i
+
+[Java]
+;java.class.path = .\php_java.jar
+;java.home = c:\jdk
+;java.library = c:\jdk\jre\bin\hotspot\jvm.dll
+;java.library.path = .\
+
+[SQL]
+sql.safe_mode = Off
+
+[ODBC]
+;odbc.default_db = Not yet implemented
+;odbc.default_user = Not yet implemented
+;odbc.default_pw = Not yet implemented
+
+; Allow or prevent persistent links.
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of uodbc.defaultlrl and uodbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+[MySQL]
+; Allow or prevent persistent links.
+mysql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo cfg_get_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+mysql.default_password =
+
+[mSQL]
+; Allow or prevent persistent links.
+msql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+msql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+msql.max_links = -1
+
+[PostgresSQL]
+; Allow or prevent persistent links.
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect(). Need a little overhead.
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+pgsql.max_links = -1
+
+[Sybase]
+; Allow or prevent persistent links.
+sybase.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+sybase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+sybase.max_links = -1
+
+;sybase.interface_file = "/usr/sybase/interfaces"
+
+; Minimum error severity to display.
+sybase.min_error_severity = 10
+
+; Minimum message severity to display.
+sybase.min_message_severity = 10
+
+; Compatability mode with old versions of PHP 3.0.
+; If on, this will cause PHP to automatically assign types to results according
+; to their Sybase type, instead of treating them all as strings. This
+; compatability mode will probably not stay around forever, so try applying
+; whatever necessary changes to your code, and turn it off.
+sybase.compatability_mode = Off
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+sybct.min_client_severity = 10
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+bcmath.scale = 0
+
+[browscap]
+;browscap = extra/browscap.ini
+
+[Informix]
+; Default host for ifx_connect() (doesn't apply in safe mode).
+ifx.default_host =
+
+; Default user for ifx_connect() (doesn't apply in safe mode).
+ifx.default_user =
+
+; Default password for ifx_connect() (doesn't apply in safe mode).
+ifx.default_password =
+
+; Allow or prevent persistent links.
+ifx.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+ifx.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ifx.max_links = -1
+
+; If on, select statements return the contents of a text blob instead of its id.
+ifx.textasvarchar = 0
+
+; If on, select statements return the contents of a byte blob instead of its id.
+ifx.byteasvarchar = 0
+
+; Trailing blanks are stripped from fixed-length char columns. May help the
+; life of Informix SE users.
+ifx.charasvarchar = 0
+
+; If on, the contents of text and byte blobs are dumped to a file instead of
+; keeping them in memory.
+ifx.blobinfile = 0
+
+; NULL's are returned as empty strings, unless this is set to 1. In that case,
+; NULL's are returned as string 'NULL'.
+ifx.nullformat = 0
+
+[Session]
+; Handler used to store/retrieve data.
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+session.save_path = /tmp
+
+; Whether to use cookies.
+session.use_cookies = 1
+
+
+; Name of the session (used as cookie name).
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+session.cookie_domain =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+session.serialize_handler = php
+
+; Percentual probability that the 'garbage collection' process is started
+; on every session initialization.
+session.gc_probability = 1
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+session.gc_maxlifetime = 1440
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+session.referer_check =
+
+; How many bytes to read from the file.
+session.entropy_length = 0
+
+; Specified here to create the session id.
+session.entropy_file =
+
+;session.entropy_length = 16
+
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public} to determine HTTP caching aspects.
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+session.cache_expire = 180
+
+; use transient sid support if enabled by compiling with --enable-trans-sid.
+session.use_trans_sid = 1
+
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatability mode with old versions of PHP 3.0.
+mssql.compatability_mode = Off
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+[Assertion]
+; Assert(expr); active by default.
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+;assert.warning = On
+
+; Don't bail out by default.
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+;assert.quiet_eval = 0
+
+[Ingres II]
+; Allow or prevent persistent links.
+ingres.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+ingres.max_persistent = -1
+
+; Maximum number of links, including persistents. -1 means no limit.
+ingres.max_links = -1
+
+; Default database (format: [node_id::]dbname[/srv_class]).
+ingres.default_database =
+
+; Default user.
+ingres.default_user =
+
+; Default password.
+ingres.default_password =
+
+[Verisign Payflow Pro]
+; Default Payflow Pro server.
+pfpro.defaulthost = "test-payflow.verisign.com"
+
+; Default port to connect to.
+pfpro.defaultport = 443
+
+; Default timeout in seconds.
+pfpro.defaulttimeout = 30
+
+; Default proxy IP address (if required).
+;pfpro.proxyaddress =
+
+; Default proxy port.
+;pfpro.proxyport =
+
+; Default proxy logon.
+;pfpro.proxylogon =
+
+; Default proxy password.
+;pfpro.proxypassword =
+
+[Sockets]
+; Use the system read() function instead of the php_read() wrapper.
+sockets.use_system_read = On
+
+[com]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+;com.typelib_file =
+; allow Distributed-COM calls
+;com.allow_dcom = true
+; autoregister constants of a components typlib on com_load()
+;com.autoregister_typelib = true
+; register constants casesensitive
+;com.autoregister_casesensitive = false
+; show warnings on duplicate constat registrations
+;com.autoregister_verbose = true
+
+[Printer]
+;printer.default_printer = ""
+
+[mbstring]
+;mbstring.internal_encoding = EUC-JP
+;mbstring.http_input = auto
+;mbstring.http_output = SJIS
+;mbstring.detect_order = auto
+;mbstring.substitute_character = none;
+
+[FrontBase]
+;fbsql.allow_persistent = On
+;fbsql.autocommit = On
+;fbsql.default_database =
+;fbsql.default_database_password =
+;fbsql.default_host =
+;fbsql.default_password =
+;fbsql.default_user = "_SYSTEM"
+;fbsql.generate_warnings = Off
+;fbsql.max_connections = 128
+;fbsql.max_links = 128
+;fbsql.max_persistent = -1
+;fbsql.max_results = 128
+;fbsql.batchSize = 1000
+
+; Local Variables:
+; tab-width: 4
+; End: