-### Contents of the preconfiguration file
-### Localization
# SEE http://www.debian.org/releases/squeeze/example-preseed.txt
-# Locale sets language and country.
-#INTL#d-i debian-installer/country string FR
-#INTL#d-i debian-installer/locale string fr_FR.UTF-8
-
-# Keyboard selection.
-#d-i console-tools/archs select at
-#INTL#d-i console-keymaps-at/keymap select fr-latin9
-# Example for a different keyboard architecture
-#d-i console-keymaps-usb/keymap select mac-usb-us
-
-### Network configuration
-# netcfg will choose an interface that has link if possible. This makes it
-# skip displaying a list if there is more than one interface.
-d-i netcfg/choose_interface select auto
-
-# To pick a particular interface instead:
-#d-i netcfg/choose_interface select eth1
-
-# If you have a slow dhcp server and the installer times out waiting for
-# it, this might be useful.
-#d-i netcfg/dhcp_timeout string 60
-
-# If you prefer to configure the network manually, uncomment this line and
-# the static network configuration below.
-#d-i netcfg/disable_dhcp boolean true
-
-# If you want the preconfiguration file to work on systems both with and
-# without a dhcp server, uncomment these lines and the static network
-# configuration below.
-#d-i netcfg/dhcp_failed note
-#d-i netcfg/dhcp_options select Configure network manually
-
-# Static network configuration.
-#d-i netcfg/get_nameservers string 192.168.1.1
-#d-i netcfg/get_ipaddress string 192.168.1.42
-#d-i netcfg/get_netmask string 255.255.255.0
-#d-i netcfg/get_gateway string 192.168.1.1
-#d-i netcfg/confirm_static boolean true
-
-# Any hostname and domain names assigned from dhcp take precedence over
-# values set here. However, setting the values still prevents the questions
-# from being shown, even if values come from dhcp.
d-i netcfg/get_hostname string myforge
d-i netcfg/get_domain string mytld
-# Disable that annoying WEP key dialog.
-d-i netcfg/wireless_wep string
-# The wacky dhcp hostname that some ISPs use as a password of sorts.
-#d-i netcfg/dhcp_hostname string radish
-
-### Mirror settings
-# If you select ftp, the mirror/country string does not need to be set.
-#d-i mirror/protocol string ftp
-#CDD#d-i mirror/country string enter information manually
-#CDD#d-i mirror/http/hostname string 192.168.0.218
-#CDD#d-i mirror/http/directory string /debian
-#CDD#d-i mirror/http/proxy string
-
-# Suite to install.
-#d-i mirror/suite string testing
-# Suite to use for loading installer components (optional).
-#d-i mirror/udeb/suite string testing
-
-### Partitioning
-# If the system has free space you can choose to only partition that space.
-# Note: this must be preseeded with a localized (translated) value.
-#d-i partman-auto/init_automatically_partition \
-# select Guided - use the largest continuous free space
-
-# Alternatively, you can specify a disk to partition. The device name
-# can be given in either devfs or traditional non-devfs format.
-# For example, to use the first disk:
-#d-i partman-auto/disk string /dev/discs/disc0/disc
-#CDD#d-i partman-auto/disk string /dev/hda
-# In addition, you'll need to specify the method to use.
-# The presently available methods are: "regular", "lvm" and "crypto"
-#NOAUTOPART#d-i partman-auto/method string regular
-
-# If one of the disks that are going to be automatically partitioned
-# contains an old LVM configuration, the user will normally receive a
-# warning. This can be preseeded away...
-#NOAUTOPART#d-i partman-auto/purge_lvm_from_device boolean true
-# And the same goes for the confirmation to write the lvm partitions.
-#NOAUTOPART#d-i partman-lvm/confirm boolean true
-
-# You can choose from any of the predefined partitioning recipes.
-# Note: this must be preseeded with a localized (translated) value.
-#NOAUTOPART#d-i partman-auto/choose_recipe \
-#NOAUTOPART# select All files in one partition (recommended for new users)
-#d-i partman-auto/choose_recipe \
-# select Separate /home partition
-#d-i partman-auto/choose_recipe \
-# select Separate /home, /usr, /var, and /tmp partitions
-
-# Or provide a recipe of your own...
-# The recipe format is documented in the file devel/partman-auto-recipe.txt.
-# If you have a way to get a recipe file into the d-i environment, you can
-# just point at it.
-#d-i partman-auto/expert_recipe_file string /hd-media/recipe
-
-# If not, you can put an entire recipe into the preconfiguration file in one
-# (logical) line. This example creates a small /boot partition, suitable
-# swap, and uses the rest of the space for the root partition:
-#d-i partman-auto/expert_recipe string \
-# boot-root :: \
-# 40 50 100 ext3 \
-# $primary{ } $bootable{ } \
-# method{ format } format{ } \
-# use_filesystem{ } filesystem{ ext3 } \
-# mountpoint{ /boot } \
-# . \
-# 500 10000 1000000000 ext3 \
-# method{ format } format{ } \
-# use_filesystem{ } filesystem{ ext3 } \
-# mountpoint{ / } \
-# . \
-# 64 512 300% linux-swap \
-# method{ swap } format{ } \
-# .
-
-# This makes partman automatically partition without confirmation.
-#NOAUTOPART#d-i partman/confirm_write_new_label boolean true
-#NOAUTOPART#d-i partman/choose_partition \
-#NOAUTOPART# select Finish partitioning and write changes to disk
-#NOAUTOPART#d-i partman/confirm boolean true
-
-### Clock and time zone setup
-# Controls whether or not the hardware clock is set to UTC.
-d-i clock-setup/utc boolean true
-
# You may set this to any valid setting for $TZ; see the contents of
# /usr/share/zoneinfo/ for valid values.
d-i time/zone string Europe/Paris
-### Apt setup
-# You can choose to install non-free and contrib software.
-#d-i apt-setup/non-free boolean true
-#d-i apt-setup/contrib boolean true
# Uncomment this if you don't want to use a network mirror.
d-i apt-setup/use_mirror boolean false
-# Uncomment this to avoid adding security sources, or
-# add a hostname to use a different server than security.debian.org.
-#CDD#d-i apt-setup/security_host string 192.168.0.218/debian-security
+
# Select which update services to use; define the mirrors to be used.
# Values shown below are the normal defaults.
#d-i apt-setup/services-select multiselect security, volatile
#d-i apt-setup/volatile_host string volatile.debian.org
-# Additional repositories, local[0-9] available
-#d-i apt-setup/local0/repository string \
-# http://local.server/debian stable main
-#d-i apt-setup/local0/repository string http://localhost/debian-local etch main
-#d-i apt-setup/local0/repository string http://gforge.eu/debian etch main
-#MIR#d-i apt-setup/local0/repository string http://debian.fusionforge.org/debian %DIST% main
-#d-i apt-setup/local0/comment string local server
-# Enable deb-src lines
-#d-i apt-setup/local0/source boolean true
-#MIR#d-i apt-setup/local0/source boolean true
-# URL to the public key of the local repository; you must provide a key or
-# apt will complain about the unauthenticated repository and so the
-# sources.list line will be left commented out
-#d-i apt-setup/local0/key string http://local.server/key
-#d-i apt-setup/local0/key string http://localhost/debian-local/key
-#d-i apt-setup/local0/key string http://gforge.eu/key
-#MIR#d-i apt-setup/local0/key string http://debian.fusionforge.org/key
-
-#MIR#d-i apt-setup/local1/repository string http://ftp2.fr.debian.org/debian %DIST% main
-#MIR#d-i apt-setup/local1/source boolean true
-# By default the installer requires that repositories be authenticated
-# using a known gpg key. This setting can be used to disable that
-# authentication. Warning: Insecure, not recommended.
-#d-i debian-installer/allow_unauthenticated string true
-#d-i debian-installer/allow_unauthenticated string true
-
###### Apt setup.
-
# automatically set the CD as the installation media.
#base-config apt-setup/uri_type select http
base-config apt-setup/uri_type select cdrom
# Use a network mirror?
apt-mirror-setup apt-setup/use_mirror boolean false
-# Do enable security updates.
-#base-config apt-setup/security-updates boolean true
-
-# You can choose to install non-free and contrib software.
-#d-i apt-setup/non-free boolean true
-#d-i apt-setup/contrib boolean true
-
-
-
### Account setup
# Skip creation of a root account (normal user account will be able to
# use sudo).
#d-i passwd/make-user boolean false
# Root password, either in clear text
-#CDD#d-i passwd/root-password password gforge
-#CDD#d-i passwd/root-password-again password gforge
+#d-i passwd/root-password password ff
+#d-i passwd/root-password-again password ff
# or encrypted using an MD5 hash.
-#d-i passwd/root-password-crypted password [MD5 hash]
+d-i passwd/root-password-crypted password **LCK**
# To create a normal user account.
d-i passwd/user-fullname string FusionForge Debian User
d-i passwd/username string ffuser
# Normal user's password, either in clear text
-#CDD#d-i passwd/user-password password gfuser
-#CDD#d-i passwd/user-password-again password gfuser
+d-i passwd/user-password password ffuser
+d-i passwd/user-password-again password ffuser
# or encrypted using an MD5 hash.
-d-i passwd/user-password-crypted password **LCK**
-
-### Base system installation
-# Select the initramfs generator used to generate the initrd for 2.6 kernels.
-#d-i base-installer/kernel/linux/initramfs-generators string yaird
-
-### Boot loader installation
-# Grub is the default boot loader (for x86). If you want lilo installed
-# instead, uncomment this:
-#d-i grub-installer/skip boolean true
-
-# This is fairly safe to set, it makes grub install automatically to the MBR
-# if no other operating system is detected on the machine.
-d-i grub-installer/only_debian boolean true
-
-# This one makes grub-installer install to the MBR if it also finds some other
-# OS, which is less safe as it might not be able to boot that other OS.
-d-i grub-installer/with_other_os boolean true
-
-# Alternatively, if you want to install to a location other than the mbr,
-# uncomment and edit these lines:
-#d-i grub-installer/only_debian boolean false
-#d-i grub-installer/with_other_os boolean false
-#d-i grub-installer/bootdev string (hd0,0)
-# To install grub to multiple disks:
-#d-i grub-installer/bootdev string (hd0,0) (hd1,0) (hd2,0)
-
-### Package selection
-#tasksel tasksel/first multiselect standard, web-server
-
-# If the desktop task is selected, install the kde and xfce desktops
-# instead of the default gnome desktop.
-#tasksel tasksel/desktop multiselect kde-desktop, xfce-desktop
-
+#d-i passwd/user-password-crypted password [MD5 hash]
#tasksel tasksel/first multiselect standard, kde-desktop
#tasksel tasksel/first multiselect standard, gnome-desktop
tasksel tasksel/first multiselect standard
-
-# Individual additional packages to install
-d-i pkgsel/include string vim ntpdate ntp build-essential debconf-utils \
-exim4-daemon-heavy mailman proftpd apache2-mpm-prefork openssl \
-sudo devscripts fakeroot svn-buildpackage dpatch debhelper reprepro openssh-server
-
-# Some versions of the installer can report back on what software you have
-# installed, and what software you use. The default is not to report back,
-# but sending reports helps the project determine what software is most
# popular and include it on CDs.
popularity-contest popularity-contest/participate boolean false
-### Finishing up the first stage install
-# Avoid that last message about the install being complete.
-d-i finish-install/reboot_in_progress note
-
-# This will prevent the installer from ejecting the CD during the reboot,
-# which is useful in some situations.
-#d-i cdrom-detect/eject boolean false
-
-### X configuration
-# X can detect the right driver for some cards, but if you're preseeding,
-# you override whatever it chooses. Still, vesa will work most places.
-#xserver-xorg xserver-xorg/config/device/driver select vesa
-
-# A caveat with mouse autodetection is that if it fails, X will retry it
-# over and over. So if it's preseeded to be done, there is a possibility of
-# an infinite loop if the mouse is not autodetected.
-#xserver-xorg xserver-xorg/autodetect_mouse boolean true
-
-# Monitor autodetection is recommended.
-xserver-xorg xserver-xorg/autodetect_monitor boolean true
-# Uncomment if you have an LCD display.
-#xserver-xorg xserver-xorg/config/monitor/lcd boolean true
-# X has three configuration paths for the monitor. Here's how to preseed
-# the "medium" path, which is always available. The "simple" path may not
-# be available, and the "advanced" path asks too many questions.
-xserver-xorg xserver-xorg/config/monitor/selection-method \
- select medium
-xserver-xorg xserver-xorg/config/monitor/mode-list \
- select 1024x768 @ 60 Hz
-
-### Preseeding other packages
-# Depending on what software you choose to install, or if things go wrong
-# during the installation process, it's possible that other questions may
-# be asked. You can preseed those too, of course. To get a list of every
-# possible question that could be asked during an install, do an
-# installation, and then run these commands:
-# debconf-get-selections --installer > file
-# debconf-get-selections >> file
-
# Mailman
mailman mailman/queue_files_present note
mailman mailman/default_server_language select fr
mailman mailman/site_languages multiselect en,ru,fr
mailman mailman/used_languages string
mailman mailman/create_site_list note
+
# Courier base
courier-base courier-base/maildir string Maildir
courier-base courier-base/webadmin-configmode boolean false
+
# Proftpd
proftpd shared/proftpd/inetd_or_standalone select standalone
-# GForge
-#CDD#gforge-db-postgresql gforge/shared/admin_password password gforge
-#CDD#gforge-db-postgresql gforge/shared/admin_password_confirm password gforge
+
+# FusionForge
+#CDD#gforge-db-postgresql gforge/shared/admin_password password fforge
+#CDD#gforge-db-postgresql gforge/shared/admin_password_confirm password fforge
gforge-db-postgresql gforge/shared/db_host string localhost
gforge-db-postgresql gforge/shared/replace_file_remove boolean true
gforge-web-apache gforge/shared/replace_file_remove boolean true
gforge-db-postgresql gforge/shared/replace_file_install boolean true
gforge-web-apache gforge/shared/replace_file_install boolean true
-#gforge-web-apache gforge/shared/ip_address string 192.168.0.47
+
# UCF
ucf ucf/changeprompt select install_new
in-target ln -s /var/lib/gforge/chroot/scmrepo /scmrepo ; \
echo 'SYSLOGD="-p /dev/log -a /var/lib/gforge/chroot/dev/log"' >> /target/etc/default/syslogd ; \
echo '/var/run/postgresql /var/lib/gforge/chroot/var/run/postgresql none bind' >> /target/etc/fstab ; \
+echo 'ffuser ALL = NOPASSWD: ALL' >> /target/etc/sudoers ; \
echo 'syntax on' >> /target/etc/vim/vimrc.local ;